When a current-carrying conductor is placed in a magnetic field, the electrons in the conductor are deflected by the Lorentz force. As a result, a voltage known as the Hall voltage builds up in the conductor, perpendicular to both the direction of the current and the direction of the magnetic field. This effect was discovered in 1879 by Edwin Hall and later named after him.
The Lorentz force \( F_L \) is set equal to the electric force \( F_{El} \):
\begin{align*} F_{El} &= F_L \\ & \\ \cancel e \cdot E &= \cancel e \cdot v \cdot B \\ & \\ E &= v \cdot B \\ & \\ \dfrac{U}{h} &= v \cdot B \\ & \\ U &= v \cdot B \cdot h \\ \end{align*}For the total charge \( Q \) of the electrons in the conductor:
$$ Q = N \cdot e $$Substituting this into the formula for the current and using \( t = \dfrac{s}{v} \), we get:
$$ I = \dfrac{Q}{t} = \dfrac{N \cdot e \cdot v}{s} $$Now we solve for the velocity \( v \) and substitute it into the equation for \( U \):
$$ v = \dfrac{I \cdot s}{N \cdot e} $$ $$ U = \dfrac{I \cdot s}{N \cdot e} \cdot B \cdot h $$We multiply both sides by the thickness \( d \) of the conductor and replace the volume \( V = s \cdot h \cdot d \) on the right-hand side:
$$ U \cdot d = \dfrac{I \cdot s}{N \cdot e} \cdot B \cdot h \cdot d $$ $$ U \cdot d = \dfrac{V}{N \cdot e} \cdot I \cdot B $$ $$ U = \dfrac{V}{N \cdot e} \cdot \dfrac{I \cdot B}{d} $$The first fraction depends only on the material and is called the Hall coefficient \( R_\mathrm{H} \):
$$ R_\mathrm{H} = \dfrac{V}{N \cdot e} $$Finally, we obtain the Hall voltage \( U_\mathrm{H} \):
$$ U_\mathrm{H} = R_\mathrm{H} \cdot \dfrac{I \cdot B}{d} $$ \( I \) = current, \( B \) = magnetic flux density, \( d \) = thickness of the conductor