Mass spectrometers are used to determine the mass of electrically charged particles. The particles are sent through a homogeneous magnetic field, which forces them onto a circular path. The radius of this path is then measured. Since the radius depends not only on the mass but also on the velocity of the particles, a Wien filter is usually placed in front of the mass spectrometer. It only lets through particles with the desired velocity \( v \).
In the following simulation you can shoot particles of a given mass and charge into a mass spectrometer. The strength and direction of the magnetic field can be changed freely. You can also add or remove a Wien filter.
In a homogeneous magnetic field the Lorentz force acts as a centripetal force. We therefore set the Lorentz force equal to the centripetal force and solve for \( m \) to calculate the mass:
\begin{aligned} F_\mathrm{Z} & = F_\mathrm{L} \\ \dfrac{m \cdot v^{\cancel 2}}{r} & = q \cdot \cancel v \cdot B \\ m & = \dfrac{q \cdot B \cdot r}{v} \\ \end{aligned}If the radius of the particle's path has been measured and the charge and velocity of the particle as well as the magnetic flux density of the field are known, the mass can be calculated.
To let only particles with one particular velocity into the mass spectrometer, the particles can first be sent through a Wien filter.
If the charge of the particle is unknown, only the specific charge \( \frac{q}{m} \) can be calculated:
\begin{aligned} F_\mathrm{L} & = F_\mathrm{Z} \\ q \cdot \cancel v \cdot B & = \dfrac{m \cdot v^{\cancel 2}}{r} \\ \dfrac{q}{m} & = \dfrac{v}{B \cdot r} \\ \end{aligned}