A Wien filter (velocity selector) only lets through electrically charged particles that have one particular velocity. All other particles are deflected by an electric and a magnetic field in such a way that they get "stuck" in the filter.
A Wien filter can therefore be used to filter out all particles that do not have the desired velocity. It can also be used to determine the velocity of charged particles.
A Wien filter is often used together with a mass spectrometer.
Charged particles shot into the filter move through a parallel-plate capacitor that sits inside a homogeneous magnetic field. The field lines of the electric and the magnetic field are perpendicular to each other.
When negatively charged particles enter from the left in the simulation (see below), they are deflected upwards by the electric field and downwards by the Lorentz force. If both forces are equal, the net force is zero and the particles fly straight ahead. Since the Lorentz force is proportional to the velocity, only particles with one particular velocity stay on a straight path through the filter. All other particles are deflected and can be stopped by an aperture at the exit.
Lorentz force:
\( F_\mathrm{L} = q \cdot v \cdot B \)Electric force:
\( F_\mathrm{El} = q \cdot E \)The Lorentz force and the electric force act in opposite directions. If both forces are equal, the net force is zero and the particles are not deflected but fly straight ahead.
\begin{aligned} F_\mathrm{El} & = F_\mathrm{L} \\ \cancel q \cdot E & = \cancel q \cdot v \cdot B \\ \end{aligned}Solving for \( v \) gives the velocity of these particles:
$$ v = \dfrac{E}{B} $$The fields can now be adjusted so that only particles with one particular velocity can pass through the filter.