The Lorentz force is the force that a magnetic field exerts on a moving charge. It is named after the Dutch mathematician and physicist Hendrik Antoon Lorentz.
$$ F = q \cdot v \cdot B $$ \( q \) = charge, \( v \) = velocity, \( B \) = magnetic flux density
The Lorentz force on a moving charge in a magnetic field acts ...
... perpendicular to the direction of motion of the charge
... perpendicular to the magnetic field lines
The figure on the left shows how to find the direction of the force on a negative charge using the left-hand rule. Hold the thumb, index finger and middle finger of your left hand perpendicular to each other. Then:
Thumb = direction of motion of the charge (\( v \))
Index finger = direction of the magnetic field lines (\( B \))
Middle finger = direction of the force (\( F \))
The force on a positive charge acts in exactly the opposite direction to the force on a negative charge. For positive charges you can therefore apply the same rule with the right hand to find the direction of the Lorentz force.
Charges move on circular paths in magnetic fields. This is because the Lorentz force acts perpendicular to the direction of motion of the charge. It therefore only changes the direction of the charge, not its speed.
The figure on the left shows the circular path of a negative charge in a magnetic field.
The Lorentz force thus acts as a centripetal force. Therefore:
\begin{aligned} F_\mathrm{L} & = F_\mathrm{Z} \\ q \cdot \cancel v \cdot B & = \dfrac{m \cdot v^{\cancel 2}}{r} \\ q \cdot B & = \dfrac{m \cdot v}{r} \\ \end{aligned}The following simulation shows the motion of charged particles in a magnetic field.
In a current-carrying wire, electrons move from the negative to the positive terminal. If the wire is in a magnetic field, the Lorentz force acts on these electrons and therefore on the wire.
To determine the force on a wire, we need the current \( I \) and the length \( l \) of the wire inside the magnetic field.
The longer a current flows through a wire, the more charge is moved. Therefore:
$$ q = I \cdot t $$The electrons in the wire move at the drift velocity \( v \). They therefore need the following time \( t \) to travel through a wire of length \( l \):
$$ t = \dfrac{l}{v} \Rightarrow q = I \cdot \dfrac{l}{v} $$Substituting this into the formula for the Lorentz force on moving charges gives the Lorentz force on a current-carrying wire:
$$ F = q \cdot v \cdot B $$ $$ F = I \cdot \dfrac{l}{\cancel v} \cdot \cancel v \cdot B $$$$ F = B \cdot I \cdot l $$ \( B \) = magnetic flux density, \( I \) = current, \( l \) = length of the wire inside the magnetic field
If the wire is not perpendicular to the field lines but at an angle \( \alpha \), then:
$$ F = B \cdot I \cdot l \cdot \sin \alpha $$The following experiment tests how the magnetic flux density \( B \), the current \( I \) and the length of the wire \( l \) affect the Lorentz force \( F \).
Observations:
These observations agree perfectly with the formula for the Lorentz force on a current-carrying wire derived above:
$$ F = B \cdot I \cdot l $$